Home Applicators for Balers Applicators for Forage Harvesters Dew Simulator Manuals Brochures Product Updates
New Holland
Your local dealer can assist you in setting up your baler or forage harvester to apply preservatives.
Applicators for Forage Harvesters
Selection guide
Products for Balers
Large Square
Small Square
Round
Controls
Hay Preservative
Brochures and Manuals
Selection guide
Applications for Forage Harvesters
Pull-Type Forage Harvester

The 55-gallon system can be used to lubricate the blower band on pull-type forage harvesters when harvesting alfalfa silage. Or, in can be used to apply inoculant on any crop. Harvest Tec has developed a blower band lubricator nozzle that efficiently places water on the implements blower housing. The 655 will reduce horsepower requirements by 15% at a spray rate of 15 gallons per hour.

SPECIFICATIONS:

  • 55-gallon poly tank
  • Steel frame clamps to implement s tongue
  • 12 volt bypass pump
    (regulation by changing tips)
  • All required plumbing & electrical components are included
Self-Propelled Forage Harvester
Self Propelled Forage Harvester

The 100 gallon system for New Holland s self-propelled forage harvesters can be used to keep the knives and blower lubricated with water when harvesting alfalfa silage. Or, the system can be used to apply crop preservative or inoculants when harvesting any crop.

SPECIFICATIONS:

  • 100-gallon plastic tank
  • Positive displacement plastic diaphragm pump rated at 1.7 GPM
  • 4 stainless steel tips for full rate adjustment
  • In cab electric rate controller
Accessories
Moisture Monitor
Moisture Monitor
 
For Self-Propelled Forage Harvesters.
The Harvest Tec Model 476 gives the operator a continuous read-out of the crop being harvested. Two unique sensors are located in the transition above the machine s blower. As the crop passes over the sensors, the moisture content is calibrated based on the electrical conductivity between the top and bottom sensor.
     
 
 
 
 
           Part # HT476DS
  • Selectable calibration for hay silage or corn silage
  • Reads between 37% and 80% moisture content
  • Accuracy: Load Average
    • Hay Silage ? 2%
    • Corn Silage ? 3%
  • A load average is displayed when the load average button is pushed on the monitor (or with a remote switch)
  • Both averages can be reset at any time
    (by load or by field)
  • A field average can also be displayed when the load average button is pushed and held
 Selection Guide
Pull-Type Forage Harvesters
55 Gallon Application Systems
 
Forage Harvester Model
Part Number
ALL
HT655000DS
Self-Propelled Forage Harvesters
100 Gallon Application Systems
 
Forage Harvester Model
Part Number
FX & FR
HT6756706DS

top of page

 

Contact Harvest Tec for the location of your nearest dealer. Phone 1-800-635-7468 - E-mail: info@harvesttec.com