Home Applicators for Balers Applicators for Forage Harvesters Dew Simulator Manuals Brochures Product Updates
Agco John Deere
Your local dealer can assist you in setting up your baler or forage harvester to apply preservatives.
Applicators for Forage Harvesters
Selection guide
Products for Balers
Round
Small Square
Intermediate Square
Control Systems
Hay Preservative
Accessories
Brochures & Manuals
Selection guide
Dealer Order Form
Order a Copy
Sign up now to get your free copy of the complete John Deere Automatic Preservative Application CD
sign up now
 
John Deere Forage Harvesters
 Applicators for Forage Harvesters
Pull-Type Forage Harvester
Pull Type Forage Harvester

The 55-gallon system can be used to lubricate the blower band on pull-type forage harvesters when harvesting alfalfa silage. Or, in can be used to apply inoculant on any crop. Harvest Tec has developed a blower band lubricator nozzle that efficiently places water on the implements blower housing. The 655 will reduce horsepower requirements by 15% at a spray rate of 15 gallons per hour.

SPECIFICATIONS:

  • 55-gallon plastic tank
  • Steel frame clamps to implement s tongue
  • 12 volt bypass pump
    (regulation by changing tips)
  • All required plumbing & electrical components are included
Self-Propelled Forage Harvester
Self Propelled Forage Harvester

The 90 gallon system for John Deere s self-propelled forage harvesters can be used to keep the knives and blower lubricated with water when harvesting alfalfa silage. Or, the system can be used to apply crop preservative or inoculants when harvesting any crop. Harvest Tec has worked with John Deere to integrate the system into the 7000 series harvesters. The 676 will turn on and off automatically with the engagement of the intake rolls on the harvester.

SPECIFICATIONS:

  • 90-gallon plastic tank
  • 12-volt electric pump
  • All required plumbing & electrical components are included

Accessories

Moisture Monitor

             Part# 476

For Self-Propelled Forage Harvesters.
The Harvest Tec Model 476 gives the operator a continuous read-out of the crop being harvested. Two unique sensors are located in the transition above
the machine s blower. As the crop passes over the sensors the moisture content is calibrated based on the electrical conductivity between the top and bottom sensor.

  • Selectable calibration for hay silage or corn silage
  • Reads between 37% and 80% moisture content
  • Accuracy: Load Average
    • Hay Silage 1 2%
    • Corn Silage 1 3%
  • A load average is displayed when the load average button is pushed on the monitor (or with a remote switch)
  • Both averages can be reset at any time (by load or by field)
  • A field average can also be displayed when the load average button is pushed and held
    top of page
 Selection Guide
Pull-Type Forage Harvesters - 55 Gallon Sprayer Systems

Harvester Model

Part #

3955

655

3975

655

3950

655

3970

655

All Other JD Pull-Types

655

Self-Propelled Forage Harvesters - 100 Gallon Sprayer Systems
Harvester Model Part # Install Kit #
6000 Series 675 6704
Self-Propelled Forage Harvesters - 90 Gallon Sprayer Systems
Harvester Model Part #
7000 Series
676

top of page
Contact Harvest Tec for the location of your nearest dealer. Phone 1-800-635-7468 - E-mail: info@harvesttec.com