Self-Propelled Forage Harvester

The 100 gallon system for CLAAS's self-propelled forage harvesters can be used to keep the knives and blower lubricated with water when harvesting alfalfa silage. Or, the system can be used to apply crop preservative or inoculants when harvesting any crop. SPECIFICATIONS: 100-gallon plastic tank Positive displacement plastic diaphragm pump rated at 1.7 GPM 4 stainless steel tips for full rate adjustment In cab electric rate controller

top of page

Accessories

             Part# 476

For Self-Propelled Forage Harvesters.
The Harvest Tec Model 476 gives the operator a continuous read-out of the crop being harvested. Two unique sensors are located in the transition above
the machine s blower. As the crop passes over the sensors the moisture content is calibrated based on the electrical conductivity between the top and bottom sensor.

• Selectable calibration for hay silage or corn silage
• Reads between 37% and 80% moisture content
• Accuracy: Load Average
  • Hay Silage ± 2%
  • Corn Silage ± 3%
• A load average is displayed when the load average button is pushed on the monitor (or with a remote switch)
• Both averages can be reset at any time (by load or by field)
• A field average can also be displayed when the load average button is pushed and held

top of page