DEALERSSubmit a customer's job records for a FREE Job Record Analysis Find out more >> |
| Large
Square |
HayBoss
G2
| Sensors for Large Square Balers |
 |
HayBoss™ systems
for large square balers are equipped with star wheel
sensors that run through the bale picking up moisture
and speed of baling. |
|
Large
Square Balers
The HayBoss G2 automatic
system accurately senses moisture on the go and adjusts the
application of preservative every three seconds to match
the condition of the hay. This precision gives the operator
the exact amount of product required to keep the crop in
great condition without wasting product. The touch-screen
display found on the HayBoss G2 automatic applicator gives
the operator complete control and provides information on:
- Moisture content
- Speed of baling (tonnage)
- Volume of preservative used per bale
- Total tons baled
The HayBoss G2 is compatible with the new G2 Bale
Indentification System, or Tagger, that attaches a tag
carrying all the information on that specific bale to the
bale itself.
Electronic control systems are also available for large square
balers. Equipped with a high-capacity 110-gallon tank mounted
on the rear of the baler, the operator can go almost non-stop.
|
top of page |
|
*NEW* HayBoss
G2 Automatic Applicators now available!
Find out more >>
 |
Small
Square Balers
Get started baling earlier and bale longer with the addition
of a preservative application system to your small square
baler. Systems are available in 55-gallon units and mount
on the top of the baler. Choose a HayBoss G2™ automatic, HayBoss, electronic, or manual control system.
| Sensors for Small Square Balers |
 |
HayBoss systems
for small square balers are equipped with two star
wheel moisture sensors mounted on the bottom of the
bale chute. |
Product Specs
|
top of page |
| Round |
*NEW* HayBoss
G2 Automatic Applicators now available!
Find out more >>

|
Round
Balers
Hay preservative can be used to bale large round bales
between 16% and 30% moisture. You have the option of a
25-gallon application system or, on certain models, a 55-gallon
application system. The system mounts on the tongue of
the baler and holds enough preservative to treat 30 to
60 tons of hay. Depending on your need, choose a 500 series automatic HayBoss G2™, HayBoss, an electronic,
or an economic manual control system (available on 25-gallon
systems only).
| Sensors for Round Balers |
 |
HayBoss systems
for round balers are equipped with two sensing discs,
one mounted on each of the baler s side walls, sensing
from side to side. |
Product Specs
|
top of page |
| AGCO
Hay Preservative |
Your hay is important.
Make sure your preservative does what it says it will.
Find out more >> |
top of page |
| Accessories |
| Shut
- Off Eye Kit |

|
The shut-off
eye senses hay on the balers pick-up automatically, starting
and stopping the application.
HT474A Shut-Off Eye Kit for use with 464
Automatic Control, 2005 & newer Automatic & Electronic
Controls
|
| Flow
Meter |

|
Digital
electronic flow meter for use with any preservative applicator
delivering between 40 and 500 pounds per hour. The flow
meter reads the application rate in pounds per hour and
total pounds used. |
| Moisture
Tester |

|
Delmhorst FX-2000, Digital Hay
Moisture Meter measures moisture levels in the windrow
and standard bales. ?
Features:
- Microcontroller circuit
- Can be used for on-the-go moisture
monitoring or as a portable meter
- In continuous mode:
- Takes two readings every
second
- Displays the average and
highest of eight accumulated readings
- Readings updated every 4
seconds
- Back lighted display
- In portable mode
- Averages up to 100 accumulated
readings
- Displays average and highest
of accumulated readings
- Measures moisture content over
the range of 6%-40%
- Ideal for high volume producers
who need the time-saving convenience of on-the-go
monitoring
|
| Transfer
Pumps |
|
Transfer
AGCO Hay Preservative safely and easily from your storage
container to your applicator tank, use any of the following
transfer pumps.
Part No. HT9214: For a rapid transfer rate
of 15 gallons per minute, this 12-volt unit can get the job
done quickly. |

|
Part
No. HT9212: This standard output, 12-volt model,
will transfer preservative at a rate of 5 gallons per
minute. |
| Floor-Mounted
Applicator Pause Switch |

|
The floor-mounted applicator
pause switch is an inexpensive addition to your application
system that enables the operator to easily stop and start
the applicator. For use with any HayBoss application system,
2005 and newer. |
| Dye
Sprayer Marking System |

|
The Dye Sprayer Marking
System is a simple way to visibly mark the wet areas on
your large square bales. Compatible with the Model 596
Automatic Applicator, Model 500 Moisture Monitor for any
large square baler, and 500 series automatic applicators
for small square balers, the 3-gallon system is mounted
near the bale chamber and when the adjustable high moisture
alarm sounds, the system will spray a red-colored, food-grade
dye on the exact location on the bale for a quick and easy
reference. |
| GPS
Interface Kit |

|
By incorporating the GPS
into the Model 500 Moisture Monitor, 596 Automatic Applicator,
or HayBoss G2 Tagger, the producer has the ability to create
yield maps for their crops, allowing them to gain the knowledge
needed to maximize productivity. The kit consists of a
removeable data storage card and GPS interface harness
that is compatitble with the Trimble 162 AgGPS, which is
purchased separately from a Trimble dealer. |
top of page |
| Brochures
and Manuals |
Instructions -
Click on the links to download the manuals.
To view the manuals you'll need the Acrobat
Reader Plug-in. |
top of page |
|
| LARGE SQUARE
- 110 GALLON APPLICATION SYSTEMS |
Baler Model |
HayBoss G2™ Automatic
Applicator Part No. |
Electronic Control
Applicator Part No. |
Upgrade to HayBoss
Part No. |
AGCO 7430 |
HT5964494B |
HT4914494 |
HT5654494B |
AGCO
7430 with Roto-Cutter |
HT5964500B |
HT4914500 |
HT5654500B |
AGCO 7433 |
HT5964518B |
HT4914518 |
HT5654518B |
AGCO
7433 with Roto-Cutter |
HT5964519B |
HT4914519 |
HT5654519B |
AGCO 7434 |
HT5964518B |
HT4914518 |
HT5654518B |
AGCO
7434 with Roto-Cutter |
HT5964519B |
HT4914519 |
HT5654519B |
AGCO 7444 |
HT5964518B |
HT4914518 |
HT5654518B |
Massey
Ferguson 2050 |
HT5964494B |
HT4914494 |
HT5654494B |
Massey Ferguson 2050
with Roto-Cutter |
HT5964500B |
HT4914500 |
HT5654500B |
Massey
Ferguson 2150 |
HT5964518B |
HT4914518 |
HT5654518B |
Massey
Ferguson 2150 with Roto-Cutter |
HT5964519B |
HT4914519 |
HT5654519B |
Massey
Ferguson 2170 |
HT5964518B |
HT4914518 |
HT5654518B |
Massey
Ferguson 2170 with Roto-Cutter |
HT5964519B |
HT4914519 |
HT5654519B |
Massey
Ferguson 2190 |
HT5964518B |
HT4914518 |
HT5654518B |
| SMALL SQUARE
- 55 GALLON APPLICATION SYSTEMS |
Baler Model |
HayBoss G2™ Automatic
Applicator Part No. |
400 Series Automatic
Applicator Part No. |
Electronic Control
Applicator Part No. |
Manual Control Applicator
Part No. |
Upgrade to Automatic
Part No. |
AGCO
1835 |
HT5504485B |
N/A |
N/A |
N/A |
N/A |
AGCO
1837 |
HT5504485B |
N/A |
N/A |
N/A |
N/A |
AGCO
1839 |
HT5504485B |
N/A |
N/A |
N/A |
N/A |
AGCO
1841 |
HT5504485B |
N/A |
N/A |
N/A |
N/A |
AGCO
1843 |
HT5504485B |
N/A |
N/A |
N/A |
N/A |
AGCO
1843N |
HT5504502B |
N/A |
N/A |
N/A |
N/A |
AGCO
1843S |
HT5504502B |
N/A |
N/A |
N/A |
N/A |
AGCO
7105 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
AGCO 7110 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
AGCO
7115 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
AGCO 7120 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
Massey
Ferguson 1835 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
Massey Ferguson 1837 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
Massey
Ferguson 1839 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
Massey
Ferguson 1841 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
Massey
Ferguson 1843 (Two-Tie) |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
Massey
Ferguson 1843N |
HT5504502B |
HT4504502B |
HT4484502 |
N/A |
HT4624400B |
Massey
Ferguson 1843S |
HT5504502B |
HT4504502B |
HT4484502 |
N/A |
HT4624400B |
| ROUND - 25
GALLON APPLICATION SYSTEMS |
Baler Model |
HayBoss Automatic
Applicator Part No. |
Electronic Control
Applicator Part No. |
Manual Control Applicator
Part No. |
Upgrade to HayBoss
Part No. |
AGCO
5134 |
HT4464484B |
HT4414484 |
HT4394484 |
HT4634400B |
AGCO 5145 |
HT4464484B |
HT4414484 |
HT4394484 |
HT4634400B |
Massey
Ferguson 1734 |
HT4464484B |
HT4414484 |
HT4394484 |
HT4634400B |
Massey Ferguson 1745 |
HT4464484B |
HT4414484 |
HT4394484 |
HT4634400B |
Massey
Ferguson 1746 |
HT4464484B |
HT4414484 |
HT4394484 |
HT4634400B |
Massey
Ferguson 1756 |
HT4464484B |
HT4414484 |
HT4394484 |
HT4634400B |
ROUND
- 55 GALLON APPLICATION SYSTEMS |
Baler Model |
HayBoss G2™ Automatic
Applicator Part No. |
400 Series Automatic
Applicator Part No. |
Electronic Control
Applicator Part No. |
Upgrade to Automatic
Part No. |
AGCO
2745 |
HT5494508B |
N/A |
N/A |
N/A |
AGCO 2746 |
HT5494508B |
N/A |
N/A |
N/A |
AGCO
2746A |
HT5494508B |
N/A |
N/A |
N/A |
AGCO 2756A |
HT5494508B |
N/A |
N/A |
N/A |
AGCO
2766 |
HT5494508B |
N/A |
N/A |
N/A |
AGCO 2846 |
HT5494524B |
N/A |
N/A |
N/A |
AGCO
2846A |
HT5494524B |
N/A |
N/A |
N/A |
AGCO 2856 |
HT5494524B |
N/A |
N/A |
N/A |
AGCO
2856A |
HT5494524B |
N/A |
N/A |
N/A |
AGCO
5446 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO 5446
SILAGE |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO
5456 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO 5545 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO
5545 SILAGE |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO 5546 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO
5546 SILAGE |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO 5556 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
Massey
Ferguson 2745 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
Massey
Ferguson 2746 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
Massey
Ferguson 2746A |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
Massey
Ferguson 2756A |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
Massey
Ferguson 2766 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
Massey
Ferguson 2846 |
HT5494524B |
N/A |
N/A |
N/A |
Massey
Ferguson 2846A |
HT5494524B |
N/A |
N/A |
N/A |
Massey
Ferguson 2856 |
HT5494524B |
N/A |
N/A |
N/A |
Massey
Ferguson 2856A |
HT5494524B |
N/A |
N/A |
N/A |
|