DEALERSSubmit a customer's job records for a FREE Job Record Analysis Find out more >> |
| Large
Square Balers |
HayBoss
G2
| Sensors for Large Square
Balers |
 |
HayBoss systems
for large square balers are equipped with star
wheel sensors that run through the bale picking
up moisture and speed of baling. |
Product Specs
- 110 gallon plastic tank
- 12 volt pumping system
- All plumbing and wiring supplied
- Control options:
HayBoss G2 or Electronic
|
Large
Square Balers
The HayBoss G2 automatic system accurately
senses moisture on the go and adjusts the application of
preservative every three seconds to match the condition
of the hay. This precision gives the operator the exact
amount of product required to keep the crop in great condition
without wasting product. The touch-screen display found
on the HayBoss G2 automatic applicator gives the operator
complete control and provides information on:
- Moisture content
- Speed of baling (tonnage)
- Volume of preservative used per bale
- Total tons baled
The HayBoss G2 is compatible with the new G2 Bale
Indentification System, or Tagger, that attaches a
tag carrying all the information on that specific bale
to the bale itself.
Electronic control systems are also available for large
square balers. Equipped with a high-capacity 110-gallon
tank mounted on the rear of the baler, the operator can
go almost non-stop.
|
top of page |
| Small
Square |
*NEW* HayBoss
G2 Automatic Applicators now available!
Find out more >>
 |
Small
Square Balers
Get started baling earlier and bale longer with the addition
of a preservative application system to your small square
baler. Systems are available in 55-gallon units and mount
on the top of the baler. Choose a HayBoss G2™ Automatic, 400 series automatic, electronic, or manual control system.
| Sensors for Small Square
Balers |
 |
HayBoss systems
for small square balers are equipped with two
star wheel moisture sensors mounted on the bottom
of the bale chute. |
Product Specs
|
top of page |
| Round |
*NEW* HayBoss
G2 Automatic Applicators now available!
Find out more >>

|
Round
Balers
Hay preservative can be used to bale large round bales
between 16% and 30% moisture. You have the option of
a 25-gallon application system or, on certain models,
a 55-gallon application system. The system mounts on
the tongue of the baler and holds enough preservative
to treat 30 to 60 tons of hay. Depending on your need,
choose an Automatic HayBoss G2™, a 400 series automatic,
an electronic, or an economic manual control system (available
on 25-gallon systems only).
| Sensors for Round Balers |
 |
HayBoss systems
for round balers are equipped with two sensing
discs, one mounted on each of the baler s side
walls, sensing from side to side. |
Product Specs
|
top of page |
| AGCO
Hay Preservative |
Your hay is important.
Make sure your preservative does what it says it will.
Find out more >> |
top of page |
| Accessories |
| Shut
- Off Eye Kit |

|
The
shut-off eye senses hay on the balers pick-up automatically,
starting and stopping the application.
HT474A Shut-Off Eye Kit for use with
464 Automatic Control, 2005 & newer Automatic & Electronic
Controls
|
| Flow
Meter |

|
Digital
electronic flow meter for use with any preservative applicator
delivering between 40 and 500 pounds per hour. The flow
meter reads the application rate in pounds per hour and
total pounds used. |
| Moisture
Tester |

|
Delmhorst FX-2000, Digital Hay
Moisture Meter measures moisture levels in the windrow
and standard bales. ?
Features:
- Microcontroller circuit
- Can be used for on-the-go moisture
monitoring or as a portable meter
- In continuous mode:
- Takes two readings every
second
- Displays the average and
highest of eight accumulated readings
- Readings updated every 4
seconds
- Back lighted display
- In portable mode
- Averages up to 100 accumulated
readings
- Displays average and highest
of accumulated readings
- Measures moisture content over
the range of 6%-40%
- Ideal for high volume producers
who need the time-saving convenience of on-the-go
monitoring
|
| Transfer
Pumps |
|
Transfer
AGCO Hay Preservative safely and easily from your storage
container to your applicator tank, use any of the following
transfer pumps.
Part No. HT9214: For a rapid transfer
rate of 15 gallons per minute, this 12-volt unit can get
the job done quickly. |

|
Part
No. HT9212: This standard output, 12-volt
model, will transfer preservative at a rate of 5 gallons
per minute. |
| Floor-Mounted
Applicator Pause Switch |

|
The floor-mounted applicator
pause switch is an inexpensive addition to your application
system that enables the operator to easily stop and start
the applicator. For use with any HayBoss application
system, 2005 and newer. |
| Dye
Sprayer Marking System |

|
The Dye Sprayer Marking
System is a simple way to visibly mark the wet areas
on your large square bales. Compatible with the Model
596 Automatic Applicator, Model 500 Moisture Monitor
for any large square baler, and 500 series automatic
applicators for small square balers, the 3-gallon system
is mounted near the bale chamber and when the adjustable
high moisture alarm sounds, the system will spray a red-colored,
food-grade dye on the exact location on the bale for
a quick and easy reference. |
| GPS
Interface Kit |

|
By incorporating the
GPS into the Model 500 Moisture Monitor, 596 Automatic
Applicator, or HayBoss G2 Tagger, the producer has the
ability to create yield maps for their crops, allowing
them to gain the knowledge needed to maximize productivity.
The kit consists of a removeable data storage card and
GPS interface harness that is compatitble with the Trimble
162 AgGPS, which is purchased separately from a Trimble
dealer. |
top of page |
| Brochures
and Manuals |
|
MANUALS:
Visit the manuals page
Instructions -
Click on the links to download the manuals.
To view the manuals you'll need the Acrobat
Reader Plug-in. |
top of page |
| Selection
Guide |
LARGE
SQUARE BALERS - 110 GALLON APPLICATION SYSTEMS |
Baler
Model |
HayBoss G2™
Automatic Applicator Part No. |
Electronic
Control Applicator Part No. |
Upgrade
to HayBoss Part No. |
AGCO
7430 |
HT5964494B |
HT4914494 |
HT5654494B |
AGCO
7430 with
Roto-Cutter |
HT5964500B |
HT4914500 |
HT5654500B |
AGCO
7433 |
HT5964518B |
HT4914518 |
HT5654518B |
AGCO
7433 with
Roto-Cutter |
HT5964519B |
HT4914519 |
HT5654519B |
AGCO
7434 |
HT5964518B |
HT4914518 |
HT5654518B |
AGCO
7434 with
Roto-Cutter |
HT5964519B |
HT4914519 |
HT5654519B |
AGCO
7444 |
HT5964518B |
HT4914518 |
HT5654518B |
Challenger
LB 33 |
HT5964494B |
HT4914494 |
HT5654494B |
Challenger LB 33
with Roto-Cutter |
HT5964500B |
HT4944500 |
HT5654500B |
Challenger
LB 34 |
HT5964492B |
HT4914492 |
HT5654492B |
Challenger LB 34
with Roto-Cutter |
HT5964501B |
HT4914501 |
HT5654501B |
Challenger
LB 33B |
HT5964515B |
HT4914518 |
HT5654518B |
Challenger LB 33B
with Roto-Cutter |
HT5964519B |
HT4914519 |
HT5654519B |
Challenger
LB 34B |
HT5964515B |
HT4914518 |
HT5654518B |
Challenger LB 34B
with Roto-Cutter |
HT5964519B |
HT4914519 |
HT5654519B |
Challenger
LB 44B |
HT5964515B |
HT4914518 |
HT5654518B |
Challenger
LB 33B
with Roto-Cutter |
HT5964519B |
HT4914519 |
HT5654519B |
| SMALL
SQUARE - 55 GALLON APPLICATION SYSTEMS |
| Baler Model |
HayBoss G2™ Automatic
Applicator Part No. |
400 Series Automatic
Applicator Part No. |
Electronic Control
Applicator Part No. |
Manual Control
Applicator Part No. |
Upgrade to HayBoss
Part No. |
AGCO
1835 |
HT5504485B |
N/A |
N/A |
N/A |
N/A |
AGCO
1837 |
HT5504485B |
N/A |
N/A |
N/A |
N/A |
AGCO
1839 |
HT5504485B |
N/A |
N/A |
N/A |
N/A |
AGCO
1841 |
HT5504485B |
N/A |
N/A |
N/A |
N/A |
AGCO
1843 |
HT5504485B |
N/A |
N/A |
N/A |
N/A |
AGCO
1843N |
HT5504502B |
N/A |
N/A |
N/A |
N/A |
AGCO
1843S |
HT5504502B |
N/A |
N/A |
N/A |
N/A |
AGCO
7105 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
AGCO
7110 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
AGCO
7115 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
AGCO
7120 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
Challenger
SB 34 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
| Challenger SB 36 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
Challenger
SB 44 |
HT5504485B |
HT4504485B |
HT4484485 |
HT4384485 |
HT4624400B |
| ROUND
BALERS - 25 GALLON APPLICATION SYSTEMS |
| Baler Model |
HayBoss Automatic
Applicator Part No. |
Electronic Control
Applicator Part No. |
Manual Control
Applicator Part No. |
Upgrade to HayBoss
Part No. |
AGCO
5134 |
HT4464484B |
HT4414484 |
HT4394484 |
HT4634400B |
AGCO
5145 |
HT4464484B |
HT4414484 |
HT4394484 |
HT4634400B |
Challenger
RB 34 |
HT4464484B |
HT4414484 |
HT4394484 |
HT4634400B |
Challenger RB 44 |
HT4464484B |
HT4414484 |
HT4394484 |
HT4634400B |
Challenger
RB 45 |
HT4464484B |
HT4414484 |
HT4394484 |
HT4634400B |
Challenger RB 452 |
HT4464484B |
HT4414484 |
HT4394484 |
HT4634400B |
ROUND
BALERS - 55 GALLON APPLICATION SYSTEMS |
| Baler Model |
HayBosss G2™ Automatic
Applicator Part No. |
400 Series Automatic
Applicator Part No. |
Electronic Control
Applicator Part No. |
Upgrade to HayBoss
Part No. |
AGCO
2745 |
HT5494508B |
N/A |
N/A |
N/A |
AGCO
2746 |
HT5494508B |
N/A |
N/A |
N/A |
AGCO
2746A |
HT5494508B |
N/A |
N/A |
N/A |
AGCO
2756A |
HT5494508B |
N/A |
N/A |
N/A |
AGCO
2766 |
HT5494508B |
N/A |
N/A |
N/A |
AGCO
2846 |
HT5494524B |
N/A |
N/A |
N/A |
AGCO
2846A |
HT5494524B |
N/A |
N/A |
N/A |
AGCO
2856 |
HT5494524B |
N/A |
N/A |
N/A |
AGCO
2856A |
HT5494524B |
N/A |
N/A |
N/A |
AGCO
5446 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO
5446 SILAGE |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO
5456 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO
5545 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO
5545 SILAGE |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO
5546 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO
5546 SILAGE |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
AGCO
5556 |
HT5494508B |
HT4494508B |
HT4484508 |
HT4634400B |
Challenger RB 46 |
N/A |
HT4494508B |
HT4484508 |
HT4634400B |
Challenger
RB 56 |
N/A |
HT4494508B |
HT4484508 |
HT4634400B |
Challenger RB 453 |
HT5494524B |
HT4494508B |
HT4484508 |
HT4634400B |
Challenger
RB 453A |
HT5494524B |
N/A |
N/A |
N/A |
Challenger
RB 463 |
HT5494524B |
HT4494508B |
HT4484508 |
HT4634400B |
Challenger RB 463A |
HT5494524B |
N/A |
N/A |
N/A |
Challenger RB 563 |
HT5494524B |
HT4494508B |
HT4484508 |
HT4634400B |
Challenger RB 563A |
HT5494524B |
N/A |
N/A |
N/A |
top of page |